What are you going to do about it? Hopefully not install an exhaust only system to pull more humid air into your humid basement.

Don’t. Do. It.

I’ve been discouraging these systems forever, here in Nova Scotia. They don’t reduce humidity levels in basements, but that’s what the marketing infers. What they do is exhaust the humid air from the basement while bringing in humid air from the outside. There is no way to reduce relative humidity levels and stop condensation without a) increasing the ambient air temperature so that it can carry more moisture while at the same time increasing the temperature of all exposed (or first condensing) surfaces or b) stripping moisture out of the ambient air (that’s what a dehumidifier does — oh, wait, that’s the market these exhaust only systems are muscling in on). In reality, the best way to deal with humid basements is to #1 Find the moisture source(s), and #2 Eliminate them. That’s the straight up, bottom line, end of story.

Moisture sources like open sumps are the problem — sealing this off before doing anything else will go a long way to reducing the moisture level in your basement or crawlspace. Note the white efflorescence on the wall — that’s salt crystals left behind from moisture migrating through the wall.

Open sumps, cracks in concrete that allow bulk water into the basement, these are pretty obvious sources. Less obvious sources include crappy drainage at the foundation, damaged or non-existent drainpipe leaders, high water tables.

Then there’s the fact that cooler surfaces cause moisture to condense out of warm, humid air. Concrete or masonry, present in most basements, are terrific first condensing surfaces. Insulating concrete and masonry can help to reduce the extent of condensation. But only if all moisture sources are dealt with so there’s trapping of more moisture in the basement…so back to #1 above.

Read this blog post by Allison Bailes at Energy Vanguard if you want more details about the pitfalls of exhaust-only systems and a fantastic in-depth explanation of why they won’t, don’t, can’t work in basements. Although he references New Orleans specifically, the physics that lead to problems with humid air and cold surfaces, along with the need to eliminate moisture sources in basements and crawlspaces are the same everywhere. The severity of the problem is related to the climate zone and the condition of the basement.

Link To Full Post

Tweet Article

Leave A Comment